Product Description
The Micro MinimOSD is the next evolution of minimization. The Minimosd was engineered to bring users a very powerfull OSD at a unreal cost. After all the community mods, we re-engineered the OSD so every useable pin was easy available.(no more surface soldering) From the manfactures of the WitesSpy KV Team OSD and all your requests have now envoled into the Micro MinimOSD! With all the features of the very popuar WiteSpy KV Team modded OSD but in a 15x15MM size. The only differenece is that It does NOT have the Dc/Dc converter. this means less heat when powered off a Flight controller. The Micro MinimOSD is the same as the older MinimOSD hardware, but has been modified to take advantage of custom firmware options. You can choose firmware that is MAVLink compatible for ArduCopter, or MultiWii Serial compatible for MultiWii and Baseflight/Cleanflight control boards. You can connect two batteries up to 4S so you can see the main flight battery voltage. the second port will allow your FPV battery voltage on the display as well. we also did not forget about the pin for analog or digital PWM RSSI and a connection where you can attach a current sensor.
Features:
All the same features as the orignal, but less the half the size
NO Dc/Dc convert . power board via 5 volts
FTDI cable compatible pinout
Standard 6-pin ISP header
Two LED indicators
ATmega328P with Arduino bootloader
MAX7456 monochrome on-screen display
15x15MM Size!
Modifications for direct connection of two batteries (up to 4S)
Pad for an Analog or Digital PWM RSSI signal
Pad for the connection of a Current Sensor
ATmega328P with Arduino bootloader
Standalone, or with APM/ Flip / Flip32+ flight controllers
These modifications allow direct connection of two batteries (up to 4S)
Big thank you to the KV Team and the OSD firmware and the multiwii-osd team
This hardware take the hardware mods for this firmware, and builds them into an RTF solution.
This Board can be used just as a normal OSD for APM or it can be used with MWC KV Team Mod .
FTDI needed to configure and use.
This board can be used for any MWC boards or ReadyToFlyer
MinimOSD-Extra firmware is wrote by Gábor Zoltán.
It's tailored for use with ArduPilot Mega and the MAVlink protocol, and designed to be as compact as possible. It's main components are an ATmega328P 8 bit microcontroller with an Arduino bootloader, and a MAX7456 monochrome on-screen display. Programming is done through an FTDI card.
Specifications
ATmega328P with Arduino bootloader
MAX7456 monochrome on-screen display
FTDI cable compatible pinout
Standard 6-pin ISP header
Two independent power sections with an LED indicator on each
Solder jumpers for combining the power sections
+5V 500mA regulator for up to +12V supply input
Solder jumper for PAL video option
Exposed test points for HSYNC and LOS
Dimensions: 0.7"W x 1.7"L (2.4" w/ pins as shown) x 0.3"H
MINIMOSD, A MINIMAL ARDUINO-BASED ON-SCREEN DISPLAY BOARD.
packge including :
1 pc Micro Minim osd baord
2 sets pins
Shipping Detail:
1.Please confirm your address carefully once you make th order.We will send the products to you
at once the payment is received
2.Item is shipped from china post airmail.Reach most of countries 15-30 business days
3.Please contact us if you have not received item in 45 days ,and give us 3 days for checking the undelivered package and reason ,if it's our problem, we will refund the money to you.
4.We could not to ship African countries except South African by airmail .So if African customer want to buy these products,please contact us about shipping problem in advance.
Payment
1.We accpt Escrow and major credit cards
Returns
1. Full refund will be given if item returned in original condition
2.Merchandise which is damaged or missing components is not refundable
3.Buyer is responsible for return shipping with proper packaging
4.Once receiving item ,we will send refund to you immediately
Warranty
1.We will provide 90 days warranty
2.Buyer are only responsible for the return shipping fees for warranty items( In most of cases ,buyer only need to return the problem components rather than the entir packag)
3.Before returning items ,please make sure you get our address and write gift on delivery sheet and give us tracking number ,if we received item ,we will repair them of exchange item asap
Feedback
1. We rely on our reputation and customer satisfaction to succeed. Therefore your feedback is extremetly important to us.Please leave good feedback to us if you are satisfied with our goods and service
2. Please give us the opportunity to resolve any problem.We understand the concerns and frustrations you may have ,and will do our best to solve the issues.
3.Email us before leaving any negative feedback or opening dispute on site.We will help to resolve the problem.
