The proportion of remote two-way with brake stepless electronic speed governor for a new generation of
high-tech intelligent model.In order to improve the anti-interference ability and long-term stability of the
circuit,the microprocessor control ship and intelligent processing signals ,using software to optimize and
improve the anti-jamming capability .
Product features:
Low internal resistance:Carefully selected low internal resistance of high-power PET to ensure that power is
surging.
Size :45mmx36mmx20mm
Weight:88g
Current :150A
Operating voltage :10-30V
UBEC:5V/3A
Internal resistance:0.001ohm
First motor connector
The signal line is connected to the receiver throttle signal port.
Connection ESC power
The remote control throttle in the median ,and turn on the power switch
Open ESC UBEC switch
Hear continuous BB sound median set
Precautions:
Battery polarity may not be reversed.
Avoid short-circuit between the cable
Motor is required and then sufficient to inhibit the capacitance of the signal.
Governor is required to work in the heat well environment .
Governor installation Do not come into contact with grease or oil (corrosive material)
ESC is the automatic identification bit ,when the ESC power supply is insufficient ,in the starting moment is lower than 10v,it is possible to cause the ESC to automatically restart ,if the restart of the instant throttle stick is not in the median ESC throttle gyrus may possibly lead to still output voltage should be avoided whenever possible in order to avoid the occurrence of these phenomena user use a higher internal resistance of the battery or when the low battery or when the low battery should stop using the replacement battery before using.
Smoothly and safely use the governor ,please read the product manual.